Kemopol Premium Protect is a dispersion paint for interior walls, with a very high coverage, which has the ability to protect the inner walls against mold growth. It creates a sturdy durable and resilient coating.<\/p>\n
APLIKIMI<\/strong><\/p>\n It is intended for the protection and decoration of all types of interior wall surfaces, and is especially recommended for areas where there is a higher humidity and condensation of water vapor. Thanks to its resistance to washing it becomes especially suitable for areas that are exposed to high loads (hallways, stairwells, hospitals, canteens, kitchen restaurants, saunas, walls around indoor pools, etc.). It should be noted that Kemopol protect is applied only to prevent the formation of mold. If it is necessary to treat an already infected wall, it is necessary to apply Algenon, a chemical for repairing walls from fouling. The recommendation is to dry the wall well, and as as recommended, Algenon is to be diluted with water (1:5) and using a brush or roller rub it into the wall in one or two coats, depending on the degree of contamination. After 24 hours, it is necessary to wash the traces of mold from the walls using rags soaked in water. After drying the wall (24 hours), the wall is repainted using Simpra preservative basecoat (if necessary), and then Kemopol protect in two layers. It is recommended that the new wall is impregnated with Simpra universal preservative basecoat. On a clean, dry, solid surface it is applied by brush, roller or spray two coats, undiluted or diluted with 10-15% water. The next layer is applied only when the previous has completely dried. Less dirty surfaces can be successfully restored with only one coat. Work is not recommended at temperatures below +5 ?C or above +35 ?C. Upon ceasing work, the packaging packaging containing the color is sealed, and the equipment cleaning washed with water after painting.<\/p>\n\n