Professional Metal Protection Systems Against Rust, Weather & Wear
Protect metal surfaces from corrosion, moisture, chemicals, UV exposure, heat, and daily wear with complete coating systems for residential, commercial, and industrial use. Our solutions combine surface preparation, anti-rust primers, direct-to-metal coatings, enamel finishes, heat-resistant paints, and specialty protective systems.
5-step
cleaning, rust treatment, primer, topcoat, maintenance
Rust protection
primers, DTM coatings, enamels
Specialty finishes
metallic, hammer effect, heat-resistant
Need the right metal coating system?
Send the metal type, dimensions, rust condition, exposure level, and desired finish. We will recommend the right primer, topcoat, 3IN1 system, heat-resistant paint, or specialty finish.
Quick Answer
A reliable metal protection system includes cleaning, rust removal or treatment where needed, anti-corrosion primer, a suitable enamel, direct-to-metal, metallic, hammer effect, or heat-resistant topcoat, and periodic inspection of exposed zones.
This page helps homeowners, contractors, industrial teams, workshops, architects, and project managers choose the correct metal primer, rust remover, protective finish, 3IN1 coating, enamel, heat-resistant system, or decorative coating.
Best for outdoor gates and railings
Use anti-rust primer plus a durable enamel topcoat, or choose a direct-to-metal 3IN1 system for faster renovation.
Best for rusty old metal
Remove loose rust, use KOREX Rust Remover where needed, then apply anti-corrosion primer and a protective finish.
Best for stoves, grills, chimneys, and pipes
Use TERMOSTAL heat-resistant systems, including 600°C or 400 Series options depending on temperature exposure.
Product Selector
Which Metal System Should I Choose?
Choose the metal protection system based on rust condition, exposure, temperature, desired appearance, renovation speed, and whether the surface is residential, commercial, industrial, or decorative.
Primer + Enamel Topcoat
- Clean and remove loose rust first
- Use anti-rust primer
- Finish with durable enamel topcoat
Direct-to-Metal 3IN1 System
For quicker application where a combined primer, anti-rust layer, and finish coat is preferred.
- Suitable for efficient renovation
- Available in white, black, anthracite, grey, and brown
- Prepare surface properly before coating
Metallic or Hammer Effect Coatings
For decorative metalwork, visible details, and modern finishes where appearance is a key decision factor.
- Choose metallic black, anthracite, grey, or gold
- Use hammer effect for textured finish
- Great for decorative renovation
TERMOSTAL Heat-Resistant Systems
For grills, chimneys, stoves, boilers, pipes, and other metal surfaces exposed to high temperatures.
- TERMOSTAL Black 600°C
- TERMOSTAL Silver 600°C
- TERMOSTAL 400 Series for suitable heat exposure
PRODUCT RANGE
Products Used in This Metal Protection System
Build a professional metal coating specification with rust removers, anti-rust primers, enamel finishes, direct-to-metal systems, metallic coatings, hammer effect paints, and heat-resistant finishes.
Corrosion Protection Base Coats
Use anti-rust primers to improve adhesion and protect prepared metal before enamel or protective topcoat application.
- KEMOLUX Primer Metal Grey
- KEMOLUX Primer Metal White
- KEMOLUX Primer Metal Brown
- KEMODUR S Primer Metal Grey
- KEMODUR S Primer Metal Brown
Durable Color and Finish Protection
Use enamel topcoats for strong color coverage, surface protection, and a durable finish on prepared metal surfaces.
- KEMOLUX Enamel White
- KEMOLUX Enamel Black
- KEMOLUX Enamel Grey
- KEMOLUX Enamel Blue
- KEMOLUX Enamel Green
- KEMOLUX Enamel Color Range
HARDLUX DIRECT 3IN1
Use direct-to-metal 3IN1 systems for faster projects where primer, anti-rust protection, and finish are combined into one application system.
- HARDLUX DIRECT 3IN1 White
- HARDLUX DIRECT 3IN1 Black
- HARDLUX DIRECT 3IN1 Anthracite
- HARDLUX DIRECT 3IN1 Grey
- HARDLUX DIRECT 3IN1 Brown
METALLIC FINISH SYSTEMS
Modern decorative metal appearance for architectural details, visible renovation surfaces, and decorative metalwork. Available in black, anthracite, grey, and gold.
- HARDLUX Metallic Black
- HARDLUX Metallic Anthracite
- HARDLUX Metallic Grey
- HARDLUX Metallic Gold
HAMMER EFFECT COATINGS
Textured protective metal finish creating a decorative hammered appearance while helping renovate visible metal elements.
- HAMMERSCHLAG Silver
- HAMMERSCHLAG Gold
- HAMMERSCHLAG Black
- HAMMERSCHLAG Grey
- HAMMERSCHLAG Color Range
HEAT RESISTANT SYSTEMS
TERMOSTAL systems for stoves, chimneys, grills, pipes, boilers, and metal surfaces exposed to high temperature. Available in 400°C and 600°C ratings.
- TERMOSTAL Black 600°C
- TERMOSTAL Silver 600°C
- TERMOSTAL 400 Series
RECOMMENDED SYSTEM
Standard Metal Protection System
Metal coating performance depends on surface preparation, rust treatment, primer selection, protective topcoat, and maintenance. Each step helps reduce corrosion, peeling, oxidation, and premature coating failure.
01
Surface Cleaning
Remove rust, grease, old loose paint, dust, and contamination before coating.
02
Rust Treatment
Use rust remover where oxidation, corrosion, or rust contamination is present.
03
Primer Application
Apply anti-corrosion primer to improve adhesion and rust resistance.
04
Topcoat Finish
Apply enamel, DTM coating, metallic finish, hammer effect, or heat-resistant paint.
05
Maintenance Cycle
Inspect and touch up exposed zones periodically before rust spreads.
What This Solves
Common Metal Problems Our Protection Systems Solve
Metal quickly deteriorates when left unprotected. Moisture, oxygen, chemicals, UV exposure, heat, and daily wear can cause rust, peeling, fading, oxidation, and structural or decorative damage.
Rust and Corrosion
Rust treatment, anti-corrosion primers, and protective finishes help slow corrosion and extend service life.
Paint Peeling
Cleaning, old paint removal, proper primer, and compatible topcoat selection improve adhesion.
Moisture Damage
Exterior and exposed metal needs a protective coating system to reduce water-related deterioration.
UV Fading
Durable topcoats help preserve appearance on gates, railings, fences, doors, and exterior metalwork.
Industrial Wear
Heavy-duty primers and protective finishes help metal surfaces resist abrasion and exposure.
Surface Oxidation
Removing oxidation and treating the surface improves coating performance and final appearance.
Poor Adhesion on Old Metal
Paint stripper, sanding, degreasing, and primer help restore a stable base for repainting.
Heat Damage
TERMOSTAL heat-resistant systems are designed for stoves, chimneys, grills, boilers, and pipes.
IDEAL PROJECT TYPES
Suitable for Residential, Commercial, Decorative & Industrial Metal
Gates & fences
Railings
Structural steel
Garage doors
Metal roofs
Machinery
Containers
Boilers, grills, stoves & chimneys
DECISION GUIDE
Primer + Enamel vs 3IN1 DTM vs Specialty Coating
A clear comparison helps users and AI answer engines understand which metal protection system is suitable for each condition, finish goal, and exposure level.
Facade Paint
Best for repainting stable surfaces and achieving a smooth exterior color refresh.
Decorative Render
Best for textured facades, stronger visual depth, and hiding small substrate imperfections.
Silicone System
Best for exposed buildings that need water repellence, breathability, and dirt resistance.
Why Choose Us
Why Choose Our Metal Protection Systems?
Complete anti-rust systems, corrosion protection, exterior weather support, high-heat options, decorative finish choices, fast renovation systems, and maintenance guidance.
Complete Anti-Rust Systems
Rust remover, primer, enamel, DTM, metallic, hammer effect, and heat-resistant options are selected around the project.
Corrosion Protection
Anti-corrosion primer and protective finish systems help reduce rust and extend service life.
Exterior Weather Support
Solutions for gates, railings, fences, garage doors, roofs, and other weather-exposed metal.
High-Heat Options
TERMOSTAL systems support grills, chimneys, stoves, boilers, and metal pipes exposed to heat.
Decorative Finish Choices
Choose solid enamel colors, metallic finishes, hammer effect coatings, or anthracite modern looks.
Fast Renovation Systems
Direct-to-metal 3IN1 coatings support faster projects without sacrificing proper surface preparation.
Quantity Estimation Support
Send dimensions, rust condition, metal type, and exposure level for product and quantity recommendations.
Maintenance Planning
Guidance helps exposed metal stay protected before rust, peeling, and coating failure spread.
Need Long-Lasting Metal Protection?
We help you choose the right primer, topcoat, or complete anti-rust system for any metal project, from gates and railings to industrial equipment and high-temperature surfaces.
FAQ
Frequently Asked Questions
Facade paint is ideal for smooth finishes and repainting stable existing surfaces. Decorative render adds texture, helps hide imperfections, and is often chosen when stronger visual depth and surface durability are required.
Longevity depends on exposure, substrate condition, product system, and application quality. Correct cleaning, repair, primer, and exterior coating can help a facade perform for many years.
Silicone systems are usually selected for better water repellence, breathability, and dirt resistance. Acrylic systems are often suitable for standard residential or budget-conscious facade projects.
Yes. Old facades can be repainted after washing, removing weak coatings, repairing cracks, stabilizing the surface, and applying the correct primer before the finish coat.
Yes. Send dimensions, project drawings, facade photos, substrate details, and finish preferences so the team can recommend the system and approximate material quantities.
A silicone facade system is usually the stronger choice for rain-exposed walls because it combines water repellence with breathability. The exact specification should still be based on the existing substrate and repair needs.
In most professional systems, yes. Primer improves adhesion, stabilizes absorbent or dusty surfaces, and helps the final coating perform more consistently.
EN 
SQ