Përshkrim
ULTRATOP LASUR – Thick-Layer Stain for Wood
ULTRATOP LASUR is a thick-layer decorative stain built for long-term, effective wood protection, indoors and out. A built-in UV filter helps guard against sun-driven decay, while water-repellent additives stop moisture from soaking into the wood’s pores, the main cause of cracking and swelling over time. The result is a shiny, transparent coating that deepens the wood’s natural tone while keeping its grain and structure fully visible.
Since ULTRATOP LASUR itself contains no biocide, it’s suited for indoor use as well as outdoor. For wood exposed to weather and microorganisms, we recommend pre-treating with a fungicidal base coat first (see below).
Key features:
- 14 shades available: white, colourless, fir, beech, oak, pine, larch, mahogany, teak, green, olive, chestnut, rosewood, and ebony
- UV-filtered, weatherproof, transparent, glossy finish
- No thinning needed; use synthetic thinner for tool cleanup only
- Covers 7 to 9 m² per liter in one layer
- Touch dry in 5 hours, fully dry in 12 hours (20°C, 65% relative humidity)
- Apply by brush, roller, or spray
- 5-year shelf life unopened (2 years for white 01)
Recommended system: Pre-treat bare or weathered wood with a single coat of ULTRA LAZURIT BASE (for light shades) or KEMOCID (for dark shades), or use ULTRA IMPREGNA for combined fungicidal-insecticidal protection, before applying ULTRATOP LASUR.
Aplikimi: Apply undiluted to dry (max. 12% moisture), clean, dust-free wood. Outdoor wood needs 2 coats; indoor wood needs 1 to 2 coats, at a recommended dry film thickness of 30 μm per coat. Recoat within 12 to 24 hours; if more than 1 to 2 weeks pass, lightly sand before applying the next layer.
Ideal for: Decorative, weatherproof finishing of outdoor wood structures such as decking, fencing, cladding, and furniture, as well as indoor wood surfaces.
SQ 
EN
Shqyrtime
Ende pa shqyrtime.